Connexion

Besoin d'aide ? Une question ? Un avis ? Rejoignez nous sur notre salon IRC pour clavarder

Forum

Système et matériels » Imprimantes scanners et Appareils Photo perte d'imprimante Les imprimantes disparaissent à chaque extinction

Papoteur Membre non connecté

Rang

Avatar

Modérateur Équipe Mageia

Inscrit le : 03/10/2011 à 22h16

Localisation : Metz

Messages: 7816

Le 23/12/2019 à 16h29

Reprise du message précédent

Hum,
Ça semble être un problème de relation entre cups et systemd. Comme l'avais noté nic80, l'échec arrive du fait de tentatives répétées de démarrage, alors que le service cups a bien démarré.
Peux-tu montrer le contenu de /etc/systemd/system/printer.target.wants/cups.service ?


Yves
   
gilles89 Membre non connecté

Rang

Avatar

Inscrit le : 28/07/2016 à 15h45

Messages: 58

Le 23/12/2019 à 17h20
Et bien voila :

[Unit]
Description=CUPS Scheduler
Documentation=man:cupsd(8)
After=network.target ypbind.service

[Service]
ExecStart=/usr/sbin/cupsd -l
Type=notify
Restart=on-failure

[Install]
Also=cups.socket cups.path
WantedBy=printer.target
   
nic80 Membre non connecté

Rang

Avatar

Inscrit le : 06/08/2018 à 23h52

Messages: 2692

Le 24/12/2019 à 18h03
Bonjour,

Si cups démarre puis s' arrête, c' est qu' il y a probablement une raison...
Comme ici une fois le système démarré, il se relance sans problème, peut être manque t' il quelque chose lors de son initialisation intiale.

On pourrait essayer de changer le paramètre de configuration de warn (paramètre par défaut) dans /etc/cups/cupds.conf à une valeur plus bavarde ( err, critical,debug voire debug2 ( même si dans ce dernier cas, je pense que l' on va vite être perdus ! )) puis redémarrer le pc pour voir ce qui se passe.
   
gilles89 Membre non connecté

Rang

Avatar

Inscrit le : 28/07/2016 à 15h45

Messages: 58

Le 25/12/2019 à 07h20
Bonjour Nic80,

Je ne comprend pas bien, alors que le fichier fait 6.2 ko, quand je l'édite avec Nano je n'ai rien.

Idem avec Vim

   
nic80 Membre non connecté

Rang

Avatar

Inscrit le : 06/08/2018 à 23h52

Messages: 2692

Le 25/12/2019 à 08h55
Bonjour,

J' ai fait une erreur de frappe...

C' est /etc/cups/cupsd.conf.

Attention, il n' est modifiable que si connecté en root (sinon il n' y a pas les droits)
   
gilles89 Membre non connecté

Rang

Avatar

Inscrit le : 28/07/2016 à 15h45

Messages: 58

Le 25/12/2019 à 11h04
Je n'ai pas bien compris ce que tu me demandes de faire.

Voici le début de /etc/cups/cupsd.conf


# Configuration file for the CUPS scheduler. See "man cupsd.conf" for a
# complete description of this file.
#

# Log general information in error_log - change "warn" to "debug"
# for troubleshooting...
LogLevel warn


# Only listen for connections from the local machine.
Listen *:631
Listen /var/run/cups/cups.sock

# Show shared printers on the local network.
Browsing On
BrowseLocalProtocols dnssd

# Default authentication type, when authentication is required...
DefaultAuthType Basic

# Web interface setting...
WebInterface Yes

# Restrict access to the server...
<Location />
Allow @LOCAL
Order allow,deny
</Location>

# Restrict access to the admin pages...
<Location /admin>
Allow @LOCAL
Order allow,deny
</Location>
   
nic80 Membre non connecté

Rang

Avatar

Inscrit le : 06/08/2018 à 23h52

Messages: 2692

Le 25/12/2019 à 12h25
Bonjour,

Dans cette rubrique

Citation :
# Log general information in error_log - change "warn" to "debug"
# for troubleshooting...
LogLevel warn



Ici, la directive LogLevel indique ce qui est enregistré dans les logs. Actuellement, la valeur est a warn pour warning. Si on le fixe à une autre valeur (err, debug ou debug2 (faire un man cupsd.conf pour les valeurs acceptées)), les logs seront plus détaillés, et cela permettra peut être de voir pourquoi cups plante et redémarre lors du démarrage et finit par être arreté (en passant regardant dans les logs).
Attention, si fixé à debug ou debug2, il faudra repasser à warn après les tests (sinon le disque va se remplir très vite avec les logs)
Edité par nic80 Le 25/12/2019 à 12h26
   
gilles89 Membre non connecté

Rang

Avatar

Inscrit le : 28/07/2016 à 15h45

Messages: 58

Le 08/01/2020 à 17h21
Bonjour Nic80,

Je pense que c'est cela qui t'intéresse.


LogDebugHistory number
Specifies the number of debugging messages that are retained for logging if an error occurs in a print job.
Debug messages are logged regardless of the LogLevel setting.

LogLevel none

LogLevel emerg

LogLevel alert

LogLevel crit

LogLevel error

LogLevel warn

LogLevel notice

LogLevel info

LogLevel debug

C'est l'extrait du man cupsd.conf.

Gilles
   
nic80 Membre non connecté

Rang

Avatar

Inscrit le : 06/08/2018 à 23h52

Messages: 2692

Le 08/01/2020 à 19h01
Bonjour,

Oui, par contre pas besoin de toucher à la directive LogDebugLevel...
D' après les lignes du man ci dessus , le logdebugdevel c' est pour quand une impression plante (mais ici ce n' est pas le cas, puisque c' est cups qui s' arrête (ou est arrêté)).
Seule la modification de la directive LogLevel est nécessaire.

Après modification de cupsd.conf, il faut redémarrer le pc, puis faire un journalctl -b0 |grep cups
   
gilles89 Membre non connecté

Rang

Avatar

Inscrit le : 28/07/2016 à 15h45

Messages: 58

Le 09/01/2020 à 07h52
et bien voila :

Caché :

janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: DNS_SD "Brother HL-5130 series @ linux" TLS=1.2
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: DNS_SD "Brother HL-5130 series @ linux" UUID=bc7d83dc-3a8c-3e6e-5232-b8fe4cc2b96a
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: DNS_SD "Brother HL-5130 series @ linux" pdl=application/octet-stream,application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] POST / HTTP/1.1
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: DNS_SD "Brother HL-5130 series @ linux" product=(HL-5140)
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: DNS_SD "Brother HL-5130 series @ linux" priority=0
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: DNS_SD "Brother HL-5130 series @ linux" note=localhost.localdomain
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: DNS_SD "Brother HL-5130 series @ linux" adminurl=https://linux.local.:631/printers/Brother-HL-5130
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: DNS_SD "Brother HL-5130 series @ linux" ty=Brother HL-5140 Foomatic/hpijs-pcl5e
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: DNS_SD "Brother HL-5130 series @ linux" rp=printers/Brother-HL-5130
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: DNS_SD "Brother HL-5130 series @ linux" qtotal=1
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: DNS_SD "Brother HL-5130 series @ linux" txtvers=1
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: Registering "Brother HL-5130 series @ linux" with DNS-SD type "_printer._tcp".
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: Registering "Brother HL-5130 series @ linux" with DNS-SD type "_ipps._tcp".
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: DNS_SD "Brother HL-5130 series @ linux" printer-type=0x80B016
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: DNS_SD "Brother HL-5130 series @ linux" printer-state=3
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: DNS_SD "Brother HL-5130 series @ linux" Duplex=T
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: DNS_SD "Brother HL-5130 series @ linux" TLS=1.2
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: DNS_SD "Brother HL-5130 series @ linux" UUID=bc7d83dc-3a8c-3e6e-5232-b8fe4cc2b96a
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: DNS_SD "Brother HL-5130 series @ linux" pdl=application/octet-stream,application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: DNS_SD "Brother HL-5130 series @ linux" product=(HL-5140)
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: DNS_SD "Brother HL-5130 series @ linux" priority=0
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: DNS_SD "Brother HL-5130 series @ linux" note=localhost.localdomain
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: DNS_SD "Brother HL-5130 series @ linux" adminurl=https://linux.local.:631/printers/Brother-HL-5130
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: DNS_SD "Brother HL-5130 series @ linux" ty=Brother HL-5140 Foomatic/hpijs-pcl5e
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: DNS_SD "Brother HL-5130 series @ linux" rp=printers/Brother-HL-5130
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: DNS_SD "Brother HL-5130 series @ linux" qtotal=1
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: DNS_SD "Brother HL-5130 series @ linux" txtvers=1
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: Registering "Brother HL-5130 series @ linux" with DNS-SD type "_ipp._tcp".
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: DNS_SD "Brother HL-5130 series @ linux" printer-type=0x80B016
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: DNS_SD "Brother HL-5130 series @ linux" printer-state=3
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: DNS_SD "Brother HL-5130 series @ linux" Duplex=T
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: DNS_SD "Brother HL-5130 series @ linux" TLS=1.2
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: DNS_SD "Brother HL-5130 series @ linux" UUID=bc7d83dc-3a8c-3e6e-5232-b8fe4cc2b96a
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: DNS_SD "Brother HL-5130 series @ linux" pdl=application/octet-stream,application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: DNS_SD "Brother HL-5130 series @ linux" product=(HL-5140)
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] Read: status=200, state=6
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: DNS_SD "Brother HL-5130 series @ linux" priority=0
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: DNS_SD "Brother HL-5130 series @ linux" note=localhost.localdomain
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: DNS_SD "Brother HL-5130 series @ linux" adminurl=https://linux.local.:631/printers/Brother-HL-5130
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: DNS_SD "Brother HL-5130 series @ linux" ty=Brother HL-5140 Foomatic/hpijs-pcl5e
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: DNS_SD "Brother HL-5130 series @ linux" rp=printers/Brother-HL-5130
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: DNS_SD "Brother HL-5130 series @ linux" qtotal=1
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: DNS_SD "Brother HL-5130 series @ linux" txtvers=1
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdAddCert: Adding certificate for PID 0
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: Discarding unused server-started event...
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] Server address is "/var/run/cups/cups.sock".
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] Accepted from localhost (Domain)
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] Waiting for request.
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: Report: clients=1
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: Report: jobs=28
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: Report: jobs-active=0
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: Report: printers=1
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] No authentication data provided.
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: Report: stringpool-string-count=779
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: Report: stringpool-alloc-bytes=9280
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: Report: stringpool-total-bytes=14944
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] POST / HTTP/1.1
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] Read: status=200, state=6
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] No authentication data provided.
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] 2.0 Create-Printer-Subscriptions 1
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: Create-Printer-Subscriptions /
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: create_subscriptions(con=0x561e57ee0a90(1), uri="/")
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: pullmethod="ippget"
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: notify-lease-duration=86400
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: notify-time-interval=60
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdAddSubscription(mask=7ff, dest=(nil)(), job=(nil)(0), uri="(null)")
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: Added subscription #2637 for server.
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdMarkDirty(----S)
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients"
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] Returning IPP successful-ok for Create-Printer-Subscriptions (/) from localhost.
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] Content-Length: 107
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] con->http=0x561e57ee95e0
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] 2.0 Cancel-Subscription 6
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=107, response=0x561e57e2d560(IPP_STATE_DATA), pipe_pid=0, file=-1
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] bytes=0, http_state=0, data_remaining=107
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: REQUEST localhost - - "POST / HTTP/1.1" 200 349 Create-Printer-Subscriptions successful-ok
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] Flushing write buffer.
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] New state is HTTP_STATE_WAITING
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] Waiting for request.
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 2] Server address is "/var/run/cups/cups.sock".
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 2] Accepted from localhost (Domain)
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 2] Waiting for request.
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 2] POST / HTTP/1.1
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 2] Read: status=200, state=6
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 2] No authentication data provided.
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 2] 2.0 CUPS-Get-Printers 2
janv. 09 07:45:28 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: CUPS-Get-Printers
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: Cancel-Subscription /
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 2] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 2] Content-Length: 1476
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 2] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 2] con->http=0x561e57eecae0
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 2] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1476, response=0x561e57e2d560(IPP_STATE_DATA), pipe_pid=0, file=-1
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 2] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 2] bytes=0, http_state=0, data_remaining=1476
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 2] Flushing write buffer.
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 2] New state is HTTP_STATE_WAITING
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 2] Waiting for request.
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 2] POST / HTTP/1.1
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 2] Read: status=200, state=6
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 2] No authentication data provided.
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 2] 2.0 CUPS-Get-Default 3
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: CUPS-Get-Default
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 2] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] Returning HTTP Non autorisé for Cancel-Subscription (/) from localhost
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 2] Content-Length: 10539
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 2] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 2] con->http=0x561e57eecae0
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 2] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=10539, response=0x561e57ee1cd0(IPP_STATE_DATA), pipe_pid=0, file=-1
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 2] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 2] bytes=0, http_state=0, data_remaining=10539
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 2] Flushing write buffer.
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 2] New state is HTTP_STATE_WAITING
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 2] Waiting for request.
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] POST / HTTP/1.1
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] Read: status=200, state=6
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] No authentication data provided.
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] 2.0 CUPS-Get-Default 4
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: CUPS-Get-Default
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] Content-Length: 10539
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: REQUEST localhost - - "POST / HTTP/1.1" 401 123 Cancel-Subscription successful-ok
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] con->http=0x561e57ee95e0
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=10539, response=0x561e57ed05b0(IPP_STATE_DATA), pipe_pid=0, file=-1
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] bytes=0, http_state=0, data_remaining=10539
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] Flushing write buffer.
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] New state is HTTP_STATE_WAITING
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] Waiting for request.
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] POST / HTTP/1.1
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] Read: status=200, state=6
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] No authentication data provided.
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] 2.0 Create-Printer-Subscriptions 5
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: Create-Printer-Subscriptions /
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: create_subscriptions(con=0x561e57ee0a90(1), uri="/")
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: recipient="dbus://"
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: notify-lease-duration=86400
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: notify-time-interval=0
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] cupsdSendHeader: code=401, type="text/html", auth_type=0
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdAddSubscription(mask=1fffff, dest=(nil)(), job=(nil)(0), uri="dbus://")
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: Added subscription #2638 for server.
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdMarkDirty(----S)
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] Returning IPP successful-ok for Create-Printer-Subscriptions (/) from localhost.
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] Content-Length: 107
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] con->http=0x561e57ee95e0
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=107, response=0x561e57ee1cd0(IPP_STATE_DATA), pipe_pid=0, file=-1
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] bytes=0, http_state=0, data_remaining=107
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: REQUEST localhost - - "POST / HTTP/1.1" 200 176 Create-Printer-Subscriptions successful-ok
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] Flushing write buffer.
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] New state is HTTP_STATE_WAITING
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] Waiting for request.
janv. 09 07:45:29 localhost.localdomain udev-configure-printer[1943]: janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] WWW-Authenticate: Basic realm=\"CUPS\", PeerCred, Local trc=\"y\"
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 1] Closing connection.
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 3] Server address is "/var/run/cups/cups.sock".
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 3] Accepted from localhost (Domain)
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 3] Waiting for request.
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 4] Server address is "/var/run/cups/cups.sock".
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 4] Accepted from localhost (Domain)
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 4] Waiting for request.
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 3] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 3] Closing connection.
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 5] Server address is "/var/run/cups/cups.sock".
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 5] Accepted from localhost (Domain)
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 5] Waiting for request.
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 4] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 4] Closing connection.
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 5] POST / HTTP/1.1
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 5] Read: status=200, state=6
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 5] Authorized as root using PeerCred.
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 5] 2.0 Cancel-Subscription 6
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: Cancel-Subscription /
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdIsAuthorized: username="root"
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdMarkDirty(----S)
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 5] Returning IPP successful-ok for Cancel-Subscription (/) from localhost.
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 5] Content-Length: 75
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 5] con->http=0x561e57ee95e0
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x561e57ed4af0(IPP_STATE_DATA), pipe_pid=0, file=-1
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 5] bytes=0, http_state=0, data_remaining=75
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: REQUEST localhost - root "POST / HTTP/1.1" 200 123 Cancel-Subscription successful-ok
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 5] Flushing write buffer.
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 5] New state is HTTP_STATE_WAITING
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 5] Waiting for request.
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 6] Server address is "/var/run/cups/cups.sock".
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 6] Accepted from localhost (Domain)
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 6] Waiting for request.
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 6] POST / HTTP/1.1
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 6] Read: status=200, state=6
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 6] No authentication data provided.
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 6] 2.0 Cancel-Subscription 7
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: Cancel-Subscription /
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdIsAuthorized: requesting-user-name="root"
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdMarkDirty(----S)
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 6] Returning IPP successful-ok for Cancel-Subscription (/) from localhost.
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 6] Content-Length: 75
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 6] con->http=0x561e57eeffe0
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x561e57ec5db0(IPP_STATE_DATA), pipe_pid=0, file=-1
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 6] bytes=0, http_state=0, data_remaining=75
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: REQUEST localhost - - "POST / HTTP/1.1" 200 152 Cancel-Subscription successful-ok
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 6] Flushing write buffer.
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 6] New state is HTTP_STATE_WAITING
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 6] Waiting for request.
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 6] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 6] Closing connection.
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 5] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 5] Closing connection.
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 2] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: [Client 2] Closing connection.
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
janv. 09 07:45:28 localhost.localdomain systemd[1]: cups-browsed.service: Succeeded.
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: Scheduler shutting down normally.
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: Discarding unused server-stopped event...
janv. 09 07:45:28 localhost.localdomain cupsd[1944]: Saving subscriptions.conf...
janv. 09 07:45:29 localhost.localdomain cupsd[1944]: cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
janv. 09 07:45:29 localhost.localdomain cupsd[1944]: Creating KeepAlive/PID file "/var/cache/cups/org.cups.cupsd".
janv. 09 07:45:29 localhost.localdomain cupsd[1944]: Saving job.cache...
janv. 09 07:45:29 localhost.localdomain cupsd[1944]: cupsdStopSelect()
janv. 09 07:45:29 localhost.localdomain systemd[1]: cups.service: Succeeded.
janv. 09 07:45:29 localhost.localdomain audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=cups comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
janv. 09 07:45:29 localhost.localdomain kernel: audit: type=1131 audit(1578552329.118:116): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=cups comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
janv. 09 07:45:29 localhost.localdomain systemd[1]: cups.path: Succeeded.
janv. 09 07:45:29 localhost.localdomain systemd[1]: cups.socket: Succeeded.
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Listening to 0.0.0.0:631 (IPv4)
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Listening to [v1.::]:631 (IPv6)
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Listening to /var/run/cups/cups.sock (Domain)
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Remote access is enabled.
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Added auto ServerAlias localhost.localdomain
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Added auto ServerAlias localhost
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Added auto ServerAlias localhost
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Loaded configuration file "/etc/cups/cupsd.conf"
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Using keychain "/etc/cups/ssl" for server name "localhost".
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Using default TempDir of /var/spool/cups/tmp...
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Configured for up to 100 clients.
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Allowing up to 100 client connections per host.
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Using policy "default" as the default.
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Full reload is required.
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 79 types, 119 filters...
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Loading printer Brother-HL-5130...
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: load_ppd: Loading /var/cache/cups/Brother-HL-5130.data...
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: cupsdRegisterPrinter(p=0x55da99660680(Brother-HL-5130))
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Loading job cache file "/var/cache/cups/job.cache"...
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Loading from cache...
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Loading from cache...
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Loading from cache...
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Loading from cache...
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Loading from cache...
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Loading from cache...
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Loading from cache...
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Loading from cache...
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Loading from cache...
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Loading from cache...
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Loading from cache...
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Loading from cache...
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Loading from cache...
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Loading from cache...
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Loading from cache...
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Loading from cache...
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Loading from cache...
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Loading from cache...
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Loading from cache...
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Loading from cache...
janv. 09 07:45:29 localhost.localdomain audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=cups comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
janv. 09 07:45:29 localhost.localdomain audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=cups-browsed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Loading from cache...
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Loading from cache...
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Loading from cache...
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Loading from cache...
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Loading from cache...
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Loading from cache...
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Loading from cache...
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Loading from cache...
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Full reload complete.
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Cleaning out old files in "/var/spool/cups/tmp".
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Cleaning out old files in "/var/cache/cups".
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: service_checkin: pid=1953
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: service_checkin: 1 listeners.
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: service_add_listener: Listener #1 at fd 3, "/var/run/cups/cups.sock".
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: service_add_listener: Matched existing listener #1 to /var/run/cups/cups.sock.
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Creating KeepAlive/PID file "/var/cache/cups/org.cups.cupsd".
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Calling FindDeviceById(cups-Brother-HL-5130)
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: FindDeviceById failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Using profile ID "Brother-HL-5130-Gray..".
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Calling CreateProfile(Brother-HL-5130-Gray..,temp)
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Registering ICC color profiles for "Brother-HL-5130".
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Calling CreateDevice(cups-Brother-HL-5130,temp)
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Listening to 0.0.0.0:631 on fd 7...
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Listening to [v1.::]:631 on fd 8...
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Listening to /var/run/cups/cups.sock on fd 3...
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Resuming new connection processing...
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Avahi server connection now available, registering printers for Bonjour broadcasting.
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Registering "Brother HL-5130 series @ linux" with DNS-SD type "_printer._tcp".
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Registering "Brother HL-5130 series @ linux" with DNS-SD type "_ipps._tcp".
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" printer-type=0x80B016
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" printer-state=3
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" Duplex=T
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" TLS=1.2
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" UUID=bc7d83dc-3a8c-3e6e-5232-b8fe4cc2b96a
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" pdl=application/octet-stream,application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" product=(HL-5140)
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" priority=0
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" note=localhost.localdomain
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" adminurl=https://linux.local.:631/printers/Brother-HL-5130
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" ty=Brother HL-5140 Foomatic/hpijs-pcl5e
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" rp=printers/Brother-HL-5130
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" qtotal=1
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" txtvers=1
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Registering "Brother HL-5130 series @ linux" with DNS-SD type "_ipp._tcp".
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" printer-type=0x80B016
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" printer-state=3
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" Duplex=T
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" TLS=1.2
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" UUID=bc7d83dc-3a8c-3e6e-5232-b8fe4cc2b96a
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" pdl=application/octet-stream,application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" product=(HL-5140)
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" priority=0
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" note=localhost.localdomain
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" adminurl=https://linux.local.:631/printers/Brother-HL-5130
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" ty=Brother HL-5140 Foomatic/hpijs-pcl5e
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" rp=printers/Brother-HL-5130
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" qtotal=1
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" txtvers=1
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Registering "Brother HL-5130 series @ linux" with DNS-SD type "_printer._tcp".
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Registering "Brother HL-5130 series @ linux" with DNS-SD type "_ipps._tcp".
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" printer-type=0x80B016
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" printer-state=3
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" Duplex=T
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" TLS=1.2
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" UUID=bc7d83dc-3a8c-3e6e-5232-b8fe4cc2b96a
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" pdl=application/octet-stream,application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" product=(HL-5140)
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" priority=0
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" note=localhost.localdomain
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" adminurl=https://linux.local.:631/printers/Brother-HL-5130
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" ty=Brother HL-5140 Foomatic/hpijs-pcl5e
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" rp=printers/Brother-HL-5130
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" qtotal=1
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" txtvers=1
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Registering "Brother HL-5130 series @ linux" with DNS-SD type "_ipp._tcp".
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" printer-type=0x80B016
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" printer-state=3
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" Duplex=T
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" TLS=1.2
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" UUID=bc7d83dc-3a8c-3e6e-5232-b8fe4cc2b96a
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" pdl=application/octet-stream,application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" product=(HL-5140)
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" priority=0
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" note=localhost.localdomain
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" adminurl=https://linux.local.:631/printers/Brother-HL-5130
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" ty=Brother HL-5140 Foomatic/hpijs-pcl5e
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" rp=printers/Brother-HL-5130
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" qtotal=1
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: DNS_SD "Brother HL-5130 series @ linux" txtvers=1
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: cupsdAddCert: Adding certificate for PID 0
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Discarding unused server-started event...
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] Server address is "/var/run/cups/cups.sock".
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] Accepted from localhost (Domain)
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] Waiting for request.
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Report: clients=1
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Report: jobs=28
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Report: jobs-active=0
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Report: printers=1
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Report: stringpool-string-count=779
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Report: stringpool-alloc-bytes=9280
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Report: stringpool-total-bytes=14944
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] POST / HTTP/1.1
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] Read: status=200, state=6
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] No authentication data provided.
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] 2.0 Create-Printer-Subscriptions 1
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Create-Printer-Subscriptions /
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: create_subscriptions(con=0x55da99702a90(1), uri="/")
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: pullmethod="ippget"
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: notify-lease-duration=86400
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: notify-time-interval=60
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: cupsdAddSubscription(mask=7ff, dest=(nil)(), job=(nil)(0), uri="(null)")
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Added subscription #2639 for server.
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: cupsdMarkDirty(----S)
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients"
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] Returning IPP successful-ok for Create-Printer-Subscriptions (/) from localhost.
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] Content-Length: 107
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] con->http=0x55da9970b5e0
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=107, response=0x55da9964f560(IPP_STATE_DATA), pipe_pid=0, file=-1
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] bytes=0, http_state=0, data_remaining=107
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: REQUEST localhost - - "POST / HTTP/1.1" 200 349 Create-Printer-Subscriptions successful-ok
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] Flushing write buffer.
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] New state is HTTP_STATE_WAITING
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] Waiting for request.
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 2] Server address is "/var/run/cups/cups.sock".
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 2] Accepted from localhost (Domain)
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 2] Waiting for request.
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 2] POST / HTTP/1.1
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 2] Read: status=200, state=6
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 2] No authentication data provided.
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 2] 2.0 CUPS-Get-Printers 2
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: CUPS-Get-Printers
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 2] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 2] Content-Length: 1476
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 2] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 2] con->http=0x55da9970eae0
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 2] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1476, response=0x55da9964f560(IPP_STATE_DATA), pipe_pid=0, file=-1
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 2] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 2] bytes=0, http_state=0, data_remaining=1476
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 2] Flushing write buffer.
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 2] New state is HTTP_STATE_WAITING
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 2] Waiting for request.
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 2] POST / HTTP/1.1
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 2] Read: status=200, state=6
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 2] No authentication data provided.
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 2] 2.0 CUPS-Get-Default 3
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: CUPS-Get-Default
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 2] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 2] Content-Length: 10539
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 2] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 2] con->http=0x55da9970eae0
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 2] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=10539, response=0x55da99703cd0(IPP_STATE_DATA), pipe_pid=0, file=-1
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 2] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 2] bytes=0, http_state=0, data_remaining=10539
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 2] Flushing write buffer.
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 2] New state is HTTP_STATE_WAITING
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 2] Waiting for request.
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] POST / HTTP/1.1
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] Read: status=200, state=6
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] No authentication data provided.
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] 2.0 CUPS-Get-Default 4
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: CUPS-Get-Default
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] Content-Length: 10539
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] con->http=0x55da9970b5e0
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=10539, response=0x55da996f25b0(IPP_STATE_DATA), pipe_pid=0, file=-1
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] bytes=0, http_state=0, data_remaining=10539
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] Flushing write buffer.
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] New state is HTTP_STATE_WAITING
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] Waiting for request.
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] POST / HTTP/1.1
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] Read: status=200, state=6
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] No authentication data provided.
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] 2.0 Create-Printer-Subscriptions 5
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Create-Printer-Subscriptions /
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: create_subscriptions(con=0x55da99702a90(1), uri="/")
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: recipient="dbus://"
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: notify-lease-duration=86400
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: notify-time-interval=0
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: cupsdAddSubscription(mask=1fffff, dest=(nil)(), job=(nil)(0), uri="dbus://")
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Added subscription #2640 for server.
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: cupsdMarkDirty(----S)
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] Returning IPP successful-ok for Create-Printer-Subscriptions (/) from localhost.
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] Content-Length: 107
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] con->http=0x55da9970b5e0
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=107, response=0x55da99703cd0(IPP_STATE_DATA), pipe_pid=0, file=-1
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] bytes=0, http_state=0, data_remaining=107
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: REQUEST localhost - - "POST / HTTP/1.1" 200 176 Create-Printer-Subscriptions successful-ok
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] Flushing write buffer.
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] New state is HTTP_STATE_WAITING
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: [Client 1] Waiting for request.
janv. 09 07:45:29 localhost.localdomain cupsd[1953]: cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1952]: ● cups.service - CUPS Scheduler
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1952]: Loaded: loaded (/usr/lib/systemd/system/cups.service; enabled; vendor preset: disabled)
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1952]: Docs: man:cupsd(8)
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1952]: Main PID: 1953 (cupsd)
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1952]: CGroup: /system.slice/cups.service
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1952]: └─1953 /usr/sbin/cupsd -l
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1952]: janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Listening to 0.0.0.0:631 (IPv4)
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1952]: janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Listening to [v1.::]:631 (IPv6)
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1952]: janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Listening to /var/run/cups/cups.sock (Domain)
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1952]: janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Remote access is enabled.
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1952]: janv. 09 07:45:29 localhost.localdomain cupsd[1953]: Added auto ServerAlias localhost.localdomain
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 1] POST / HTTP/1.1
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 1] Read: status=200, state=6
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 1] No authentication data provided.
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 1] 2.0 Cancel-Subscription 6
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: Cancel-Subscription /
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 1] Returning HTTP Non autorisé for Cancel-Subscription (/) from localhost
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: REQUEST localhost - - "POST / HTTP/1.1" 401 123 Cancel-Subscription successful-ok
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 1] cupsdSendHeader: code=401, type="text/html", auth_type=0
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 1] WWW-Authenticate: Basic realm=\"CUPS\", PeerCred, Local trc=\"y\"
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: Expiring subscriptions...
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 1] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 1] Closing connection.
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 3] Server address is "/var/run/cups/cups.sock".
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 3] Accepted from localhost (Domain)
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 3] Waiting for request.
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 3] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 3] Closing connection.
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 4] Server address is "/var/run/cups/cups.sock".
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 4] Accepted from localhost (Domain)
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 4] Waiting for request.
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 4] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 4] Closing connection.
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 5] Server address is "/var/run/cups/cups.sock".
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 5] Accepted from localhost (Domain)
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 5] Waiting for request.
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 5] POST / HTTP/1.1
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 5] Read: status=200, state=6
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 5] Authorized as root using PeerCred.
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 5] Read: status=100, state=6
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 5] Read: status=100, state=6
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 5] Read: status=100, state=6
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 5] Read: status=100, state=6
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 5] Read: status=100, state=6
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 5] Read: status=100, state=6
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 5] 2.0 Cancel-Subscription 6
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: Cancel-Subscription /
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: cupsdIsAuthorized: username="root"
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: cupsdMarkDirty(----S)
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 5] Returning IPP successful-ok for Cancel-Subscription (/) from localhost.
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 5] Content-Length: 75
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 5] con->http=0x55da9970b5e0
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x55da996f6af0(IPP_STATE_DATA), pipe_pid=0, file=-1
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 5] bytes=0, http_state=0, data_remaining=75
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: REQUEST localhost - root "POST / HTTP/1.1" 200 123 Cancel-Subscription successful-ok
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 5] Flushing write buffer.
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 5] New state is HTTP_STATE_WAITING
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 5] Waiting for request.
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 6] Server address is "/var/run/cups/cups.sock".
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 6] Accepted from localhost (Domain)
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 6] Waiting for request.
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 6] POST / HTTP/1.1
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 6] Read: status=200, state=6
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 6] No authentication data provided.
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 6] Read: status=100, state=6
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 6] Read: status=100, state=6
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 6] Read: status=100, state=6
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 6] Read: status=100, state=6
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 6] Read: status=100, state=6
janv. 09 07:45:30 localhost.localdomain audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=cups-browsed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 6] Read: status=100, state=6
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 6] Read: status=100, state=6
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 6] 2.0 Cancel-Subscription 7
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: Cancel-Subscription /
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: cupsdIsAuthorized: requesting-user-name="root"
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: cupsdMarkDirty(----S)
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 6] Returning IPP successful-ok for Cancel-Subscription (/) from localhost.
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 6] Content-Length: 75
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 6] con->http=0x55da99711fe0
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x55da996e7db0(IPP_STATE_DATA), pipe_pid=0, file=-1
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 6] bytes=0, http_state=0, data_remaining=75
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: REQUEST localhost - - "POST / HTTP/1.1" 200 152 Cancel-Subscription successful-ok
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 6] Flushing write buffer.
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 6] New state is HTTP_STATE_WAITING
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 6] Waiting for request.
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 6] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 6] Closing connection.
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 5] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 5] Closing connection.
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 2] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: [Client 2] Closing connection.
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
janv. 09 07:45:30 localhost.localdomain systemd[1]: cups-browsed.service: Succeeded.
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: Scheduler shutting down normally.
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: Discarding unused server-stopped event...
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: Saving subscriptions.conf...
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: Creating KeepAlive/PID file "/var/cache/cups/org.cups.cupsd".
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: Saving job.cache...
janv. 09 07:45:30 localhost.localdomain cupsd[1953]: cupsdStopSelect()
janv. 09 07:45:30 localhost.localdomain systemd[1]: cups.service: Succeeded.
janv. 09 07:45:30 localhost.localdomain audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=cups comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
janv. 09 07:45:30 localhost.localdomain systemd[1]: cups.path: Succeeded.
janv. 09 07:45:30 localhost.localdomain systemd[1]: cups.socket: Succeeded.
janv. 09 07:45:30 localhost.localdomain cupsd[1962]: Listening to 0.0.0.0:631 (IPv4)
janv. 09 07:45:30 localhost.localdomain cupsd[1962]: Listening to [v1.::]:631 (IPv6)
janv. 09 07:45:30 localhost.localdomain cupsd[1962]: Listening to /var/run/cups/cups.sock (Domain)
janv. 09 07:45:30 localhost.localdomain cupsd[1962]: Remote access is enabled.
janv. 09 07:45:30 localhost.localdomain cupsd[1962]: Added auto ServerAlias localhost.localdomain
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1961]: ● cups.service - CUPS Scheduler
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1961]: Loaded: loaded (/usr/lib/systemd/system/cups.service; enabled; vendor preset: disabled)
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1961]: Docs: man:cupsd(8)
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1961]: Main PID: 1962 (cupsd)
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1961]: CGroup: /system.slice/cups.service
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1961]: └─1962 /usr/sbin/cupsd -l
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1961]: janv. 09 07:45:30 localhost.localdomain cupsd[1962]: Listening to 0.0.0.0:631 (IPv4)
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1961]: janv. 09 07:45:30 localhost.localdomain cupsd[1962]: Listening to [v1.::]:631 (IPv6)
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1961]: janv. 09 07:45:30 localhost.localdomain cupsd[1962]: Listening to /var/run/cups/cups.sock (Domain)
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1961]: janv. 09 07:45:30 localhost.localdomain cupsd[1962]: Remote access is enabled.
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1961]: janv. 09 07:45:30 localhost.localdomain cupsd[1962]: Added auto ServerAlias localhost.localdomain
janv. 09 07:45:30 localhost.localdomain systemd[1]: cups.service: Succeeded.
janv. 09 07:45:30 localhost.localdomain audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=cups comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
janv. 09 07:45:30 localhost.localdomain audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=cups comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
janv. 09 07:45:30 localhost.localdomain systemd[1]: cups.path: Succeeded.
janv. 09 07:45:30 localhost.localdomain systemd[1]: cups.socket: Succeeded.
janv. 09 07:45:30 localhost.localdomain cupsd[1966]: Listening to 0.0.0.0:631 (IPv4)
janv. 09 07:45:30 localhost.localdomain cupsd[1966]: Listening to [v1.::]:631 (IPv6)
janv. 09 07:45:30 localhost.localdomain cupsd[1966]: Listening to /var/run/cups/cups.sock (Domain)
janv. 09 07:45:30 localhost.localdomain cupsd[1966]: Remote access is enabled.
janv. 09 07:45:30 localhost.localdomain cupsd[1966]: Added auto ServerAlias localhost.localdomain
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1967]: ● cups.service - CUPS Scheduler
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1967]: Loaded: loaded (/usr/lib/systemd/system/cups.service; enabled; vendor preset: disabled)
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1967]: Docs: man:cupsd(8)
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1967]: Main PID: 1966 (cupsd)
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1967]: CGroup: /system.slice/cups.service
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1967]: └─1966 /usr/sbin/cupsd -l
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1967]: janv. 09 07:45:30 localhost.localdomain cupsd[1966]: Listening to 0.0.0.0:631 (IPv4)
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1967]: janv. 09 07:45:30 localhost.localdomain cupsd[1966]: Listening to [v1.::]:631 (IPv6)
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1967]: janv. 09 07:45:30 localhost.localdomain cupsd[1966]: Listening to /var/run/cups/cups.sock (Domain)
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1967]: janv. 09 07:45:30 localhost.localdomain cupsd[1966]: Remote access is enabled.
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1967]: janv. 09 07:45:30 localhost.localdomain cupsd[1966]: Added auto ServerAlias localhost.localdomain
janv. 09 07:45:30 localhost.localdomain systemd[1]: cups.service: Succeeded.
janv. 09 07:45:30 localhost.localdomain audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=cups comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
janv. 09 07:45:30 localhost.localdomain audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=cups comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
janv. 09 07:45:30 localhost.localdomain systemd[1]: cups.path: Succeeded.
janv. 09 07:45:30 localhost.localdomain systemd[1]: cups.socket: Succeeded.
janv. 09 07:45:30 localhost.localdomain cupsd[1972]: Listening to 0.0.0.0:631 (IPv4)
janv. 09 07:45:30 localhost.localdomain cupsd[1972]: Listening to [v1.::]:631 (IPv6)
janv. 09 07:45:30 localhost.localdomain cupsd[1972]: Listening to /var/run/cups/cups.sock (Domain)
janv. 09 07:45:30 localhost.localdomain cupsd[1972]: Remote access is enabled.
janv. 09 07:45:30 localhost.localdomain cupsd[1972]: Added auto ServerAlias localhost.localdomain
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1971]: ● cups.service - CUPS Scheduler
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1971]: Loaded: loaded (/usr/lib/systemd/system/cups.service; enabled; vendor preset: disabled)
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1971]: Docs: man:cupsd(8)
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1971]: Main PID: 1972 (cupsd)
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1971]: CGroup: /system.slice/cups.service
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1971]: └─1972 /usr/sbin/cupsd -l
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1971]: janv. 09 07:45:30 localhost.localdomain cupsd[1972]: Listening to 0.0.0.0:631 (IPv4)
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1971]: janv. 09 07:45:30 localhost.localdomain cupsd[1972]: Listening to [v1.::]:631 (IPv6)
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1971]: janv. 09 07:45:30 localhost.localdomain cupsd[1972]: Listening to /var/run/cups/cups.sock (Domain)
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1971]: janv. 09 07:45:30 localhost.localdomain cupsd[1972]: Remote access is enabled.
janv. 09 07:45:30 localhost.localdomain udev-configure-printer[1971]: janv. 09 07:45:30 localhost.localdomain cupsd[1972]: Added auto ServerAlias localhost.localdomain
janv. 09 07:45:30 localhost.localdomain systemd[1]: cups.service: Succeeded.
janv. 09 07:45:30 localhost.localdomain audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=cups comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
janv. 09 07:45:30 localhost.localdomain audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=cups comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
janv. 09 07:45:30 localhost.localdomain systemd[1]: cups.path: Succeeded.
janv. 09 07:45:30 localhost.localdomain systemd[1]: cups.path: Start request repeated too quickly.
janv. 09 07:45:30 localhost.localdomain systemd[1]: cups.path: Failed with result 'start-limit-hit'.
janv. 09 07:45:30 localhost.localdomain systemd[1]: cups.socket: Succeeded.
janv. 09 07:45:30 localhost.localdomain systemd[1]: cups.socket: Start request repeated too quickly.
janv. 09 07:45:30 localhost.localdomain systemd[1]: cups.socket: Failed with result 'start-limit-hit'.
janv. 09 07:45:30 localhost.localdomain systemd[1]: cups.service: Start request repeated too quickly.
janv. 09 07:45:30 localhost.localdomain systemd[1]: cups.service: Failed with result 'start-limit-hit'.
janv. 09 07:45:30 localhost.localdomain systemd[1]: cups-browsed.service: Job cups-browsed.service/start failed with result 'dependency'.
[root@localhost gilles]#


A +
Gilles

Edit : ~ 700 lignes passées en mode caché. Edité par stroibe974 Le 09/01/2020 à 19h39
   
Répondre
Vous n'êtes pas autorisé à écrire dans cette catégorie